{"title":"Chevrolet Camaro MaxRamps Car Ramps","description":"\u003cp\u003eRadiant Speed Works stocks the MaxRamps lineup for the 2010-2024 Chevrolet Camaro, 5th gen and 6th gen alike: drive-up service ramps, low angle split ramps, trailer ramps, jack ramps and scale ramps. Every MaxRamps ramp is solid-core foam with a polyurea coating, made in the USA, and rated up to 1,750 pounds per ramp.\u003c\/p\u003e\u003ch2\u003eWhich MaxRamps Fit Your Camaro?\u003c\/h2\u003e\u003cp\u003eGo by front tire width first. LS, LT and SS cars on 245 fronts fit every ramp here. The ZL1, the SS 1LE and the 2013-2015 1LE run 285 fronts, so choose a ramp with a 12-inch tire limit: the MR67-10, MR67-10-SP or MR80-10-SP. The ZL1 1LE runs 305 fronts that sit right at 12 inches, so measure before ordering. If the car is lowered or wears a splitter, the MR72-8-SP climbs at 6.8 degrees and the MR80-10-SP at 8 degrees, or add MR56-EXT or MR67-EXT extenders to a standard pair.\u003c\/p\u003e\u003ch2\u003eMaxRamps vs Race Ramps\u003c\/h2\u003e\u003cp\u003eShopping Race Ramps for your Camaro? The MaxRamps MR56-8 and MR67-10 match the Race Ramps RR-56 and RR-XT on length, lift and the 10.8 degree approach, and MaxRamps rates each ramp at 1,750 pounds against 1,500. MaxRamps also builds dedicated jack ramps and a full trailer ramp line, including flap and tilt-deck versions. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e","products":[{"product_id":"chevrolet-camaro-extra-long-trailer-ramps-maxramps-mrtx-8l","title":"Chevrolet Camaro Extra-Long Trailer Ramps, MaxRamps MRTX-8L, 74-Inch, 8-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Extra-Long Trailer Ramps, MaxRamps MRTX-8L, 74-Inch, 8-Inch Rise\u003c\/h1\u003e\u003cp\u003eLoading a Camaro onto a trailer with a tall deck is where the front fascia usually takes the hit. The MRTX-8L stretches an 8-inch rise over 74 inches, so the nose climbs slowly instead of tipping into the trailer's own ramps.\u003c\/p\u003e\u003cp\u003eAt 6.3 degrees it is the gentlest 8-inch option MaxRamps makes. That matters most on a 6th gen SS or ZL1 with the factory splitter, and on any 5th gen that has been lowered on springs or coilovers.\u003c\/p\u003e\u003cp\u003eEach ramp weighs about 16 pounds, light enough to toss in the truck bed or trailer box when you're done. They are made in the USA from EPS foam with a polyurea skin that grips the ground and the tire.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-8L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 74 x 14 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 6.3 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 16 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need the extra-long version?\u003c\/strong\u003e\u003cbr\u003eIf your Camaro has a front splitter or sits lower than stock, yes. The longer ramp is what keeps the angle down at a full 8 inches of rise. For a stock-height LT or SS, the shorter MRTX-8 often works.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a ZL1 fit the 12-inch platform?\u003c\/strong\u003e\u003cbr\u003eThe ZL1 runs wide front tires, so check the size on your sidewall against the 12-inch max before ordering. Most V6, LT and SS fronts fit with room to spare.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600432714011,"sku":"MXR-MRTX-8L-CAMARO","price":565.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-8L_1_9e77024e-c700-4372-baaf-12161dcec102.jpg?v=1794426065"},{"product_id":"chevrolet-camaro-car-hauler-ramps-maxramps-mrtx-8","title":"Chevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-8, 55-Inch, 8-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-8, 55-Inch, 8-Inch Rise\u003c\/h1\u003e\u003cp\u003eThe MRTX-8 is the widest ramp in the MaxRamps trailer line. Its 16-inch platform takes tires up to 14 inches wide, so even the big rubber on a ZL1 1LE or a Camaro on aftermarket wheels has room.\u003c\/p\u003e\u003cp\u003eIt gives you 8 inches of rise in a 55-inch length, for an 8.7-degree approach. That's a good match for stock-height Camaros going onto a trailer with a moderate deck height.\u003c\/p\u003e\u003cp\u003eEach ramp is about 12 pounds and made in the USA from polyurea-coated foam. The coating grips both the tire and the ground so the ramp stays where you put it.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 55 x 16 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 8.7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eMRTX-8 or MRTX-8L?\u003c\/strong\u003e\u003cbr\u003eSame 8-inch rise. The MRTX-8 is shorter and wider; the MRTX-8L is longer with a lower 6.3-degree angle. Pick the 8L for lowered or splitter-equipped Camaros and the MRTX-8 when tire width is the bigger concern.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs my Camaro too heavy?\u003c\/strong\u003e\u003cbr\u003eNo. Camaros weigh well under the 7,000 lb vehicle limit, even the heavier ZL1 convertible.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600433402139,"sku":"MXR-MRTX-8-CAMARO","price":451.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-8_1_f52faea3-dc9a-48f4-a0f3-5f30265fb8f4.jpg?v=1794426070"},{"product_id":"chevrolet-camaro-tilt-trailer-ramps-maxramps-mrtx-7t","title":"Chevrolet Camaro Tilt Trailer Ramps, MaxRamps MRTX-7T, 74-Inch, 7-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Tilt Trailer Ramps, MaxRamps MRTX-7T, 74-Inch, 7-Inch Rise\u003c\/h1\u003e\u003cp\u003eTilt trailers are great for low cars until the deck edge meets your Camaro's front lip. The MRTX-7T has a 1-inch notch that seats against the end of a tilt deck, so the ramp and trailer form one smooth incline.\u003c\/p\u003e\u003cp\u003eThe 74-inch length and 5.5-degree approach keep the nose of a 5th or 6th gen Camaro well clear on the way up, including cars on lowering springs.\u003c\/p\u003e\u003cp\u003eEach ramp weighs about 14 pounds. Made in the USA from foam with a polyurea coating that grips the tire and won't scratch the trailer.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-7T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 74 x 14 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 5.5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNotch depth:\u003c\/strong\u003e 1 inch, for tilt trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 14 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need the tilt version?\u003c\/strong\u003e\u003cbr\u003eOnly if you haul on a tilt deck. On a standard trailer with fixed ramps, look at the MRTX-7 or MRTX-7FP instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill these work for a lowered Camaro?\u003c\/strong\u003e\u003cbr\u003eYes. The 5.5-degree approach is one of the lowest in the lineup, which is why these get used for lowered and track-prepped cars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600433991963,"sku":"MXR-MRTX-7T-CAMARO","price":513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-7T_1_3e54cf91-072a-4caa-973a-36e62f880028.jpg?v=1794426078"},{"product_id":"chevrolet-camaro-flap-compatible-trailer-ramps-maxramps-mrtx-7fp","title":"Chevrolet Camaro Flap-Compatible Trailer Ramps, MaxRamps MRTX-7FP, 74-Inch, Pair","description":"\u003ch1\u003eChevrolet Camaro Flap-Compatible Trailer Ramps, MaxRamps MRTX-7FP, 74-Inch\u003c\/h1\u003e\u003cp\u003eEnclosed trailers with a ramp door usually have a fold-out flap at the end, and that flap leaves a lip a low car can catch. The MRTX-7FP has a groove cut for an unfolded flap, so it sits flush and gives your Camaro one clean slope into the trailer.\u003c\/p\u003e\u003cp\u003eIt's 74 inches long and 6.25 inches tall with a 5.5-degree approach. That's low enough for a 6th gen ZL1 splitter or a slammed 5th gen SS.\u003c\/p\u003e\u003cp\u003eEach ramp weighs about 14 pounds, so it rides along in the trailer without eating space. Made in the USA from polyurea-coated foam.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-7FP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 74 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 6.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 5.5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrailer fit:\u003c\/strong\u003e Grooved for an unfolded trailer door flap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 14 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes my trailer need a flap?\u003c\/strong\u003e\u003cbr\u003eThis version is built for enclosed trailers with a door flap. Without one, the MRTX-7 is the same length and angle with a flat bottom.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I leave them in the trailer?\u003c\/strong\u003e\u003cbr\u003eYes. They're light foam and won't rust or rattle, so a lot of owners just keep a pair strapped in the front of the trailer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600434123035,"sku":"MXR-MRTX-7FP-CAMARO","price":513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-7FP_1_d95de849-3c21-49d0-b169-5e176a4aeb1c.jpg?v=1794426084"},{"product_id":"chevrolet-camaro-car-trailer-ramps-maxramps-mrtx-7","title":"Chevrolet Camaro Car Trailer Ramps, MaxRamps MRTX-7, 74-Inch, 7-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Car Trailer Ramps, MaxRamps MRTX-7, 74-Inch, 7-Inch Rise\u003c\/h1\u003e\u003cp\u003eThe MRTX-7 is the all-around trailer ramp for a low Camaro. It spreads a 7-inch rise over 74 inches for a 5.5-degree approach, so you can load without scraping the fascia or the factory chin spoiler.\u003c\/p\u003e\u003cp\u003eThat length covers most open car haulers and enclosed trailers. If your Camaro has a splitter, aero kit or lowered suspension, this is the angle you want.\u003c\/p\u003e\u003cp\u003eEach ramp is about 14 pounds. They're made in the USA from EPS foam with a polyurea coating, so they won't rust, crack or slide while you drive up.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 74 x 14 x 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 7 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 5.5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 14 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow do I choose between the 7-inch ramps?\u003c\/strong\u003e\u003cbr\u003eThey share the same 74-inch length and angle. Get the MRTX-7T for a tilt deck, the MRTX-7FP for an enclosed trailer with a door flap, and the MRTX-7 for everything else.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill they fit my Camaro's tires?\u003c\/strong\u003e\u003cbr\u003eThe platform takes tires up to 12 inches wide. Check the front tire size on your sidewall, especially on ZL1 and 1LE cars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600434319643,"sku":"MXR-MRTX-7-CAMARO","price":513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-7_1_7f47d1e0-d01b-45d5-88ce-4a49e3bf4a8a.jpg?v=1794426089"},{"product_id":"chevrolet-camaro-car-hauler-ramps-maxramps-mrtx-6","title":"Chevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-6, 6-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-6, 6-Inch Rise\u003c\/h1\u003e\u003cp\u003eThe MRTX-6 gives a Camaro 6 inches of rise in a 45-inch ramp. It's for lower trailer decks, or for adding just enough height at the base of your trailer's own ramps to clear the front lip.\u003c\/p\u003e\u003cp\u003eThe approach angle is 8.2 degrees, which suits stock-height LT, SS and V6 Camaros from both generations.\u003c\/p\u003e\u003cp\u003eAt about 6 pounds each, these are some of the easiest ramps to carry around. Made in the USA from foam with a grippy polyurea coating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 45 x 14 x 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 8.2 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 6 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs 6 inches enough?\u003c\/strong\u003e\u003cbr\u003eIt depends on your trailer. Measure from the ground to the top of the trailer's ramp or deck edge. If it's taller than 6 inches, step up to a 7- or 8-inch ramp.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill my lowered Camaro clear it?\u003c\/strong\u003e\u003cbr\u003eOn a lowered car, look at the MRTX-5 or MRTX-7. Both have lower approach angles.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600434450715,"sku":"MXR-MRTX-6-CAMARO","price":356.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-6_1_86783103-4d3f-47e3-b6b1-33fad998fec8.jpg?v=1794426095"},{"product_id":"chevrolet-camaro-car-hauler-ramps-maxramps-mrtx-4","title":"Chevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-4, 4-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-4, 4-Inch Rise\u003c\/h1\u003e\u003cp\u003eSometimes your Camaro only needs a few inches to get past the first break-over point. The MRTX-4 adds 4 inches of rise at a 5-degree approach, which takes the sharp edge off a trailer ramp, a curb or a steep driveway.\u003c\/p\u003e\u003cp\u003eIt's 46 inches long and about 6 pounds per ramp, so it's easy to keep with the trailer or in the garage for a car with a low chin.\u003c\/p\u003e\u003cp\u003eMade in the USA from EPS foam with a polyurea coating that holds onto the tire and the ground.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 46 x 14 x 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 5 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 6 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhat is a 4-inch ramp good for?\u003c\/strong\u003e\u003cbr\u003eBridging the gap at the bottom of a trailer's ramps, getting over a curb or garage lip, and giving a floor jack room under a low front end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it hold a Camaro?\u003c\/strong\u003e\u003cbr\u003eYes. It's rated for 3,500 lb per pair on vehicles up to 7,000 lb, and every Camaro is well under that.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600435007771,"sku":"MXR-MRTX-4-CAMARO","price":344.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-4_1_7b52e190-f271-4a9d-9639-ed2c65fa7f29.jpg?v=1794426101"},{"product_id":"chevrolet-camaro-low-angle-trailer-ramps-maxramps-mrtx-5","title":"Chevrolet Camaro Low Angle Trailer Ramps, MaxRamps MRTX-5, 67-Inch, 5-Inch Rise, Pair","description":"\u003ch1\u003eChevrolet Camaro Low Angle Trailer Ramps, MaxRamps MRTX-5, 67-Inch, 5-Inch Rise\u003c\/h1\u003e\u003cp\u003eThe MRTX-5 has the lowest approach angle in the MaxRamps trailer lineup at 4.3 degrees. If your Camaro sits on coilovers, wears an aftermarket splitter, or scrapes on a parking block, start here.\u003c\/p\u003e\u003cp\u003eIt stretches 5 inches of rise over 67 inches. That works at the base of a trailer's ramps, at the end of a low deck, or anywhere the front end needs a gentle lead-in.\u003c\/p\u003e\u003cp\u003eEach ramp weighs about 10 pounds and is made in the USA from polyurea-coated foam.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRTX-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 67 x 14 x 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRise:\u003c\/strong\u003e 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 4.3 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 10 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy so long for 5 inches?\u003c\/strong\u003e\u003cbr\u003eThe extra length is what gets the angle down to 4.3 degrees. It's built for the lowest cars, where even a 5-degree ramp can touch.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e5th gen or 6th gen?\u003c\/strong\u003e\u003cbr\u003eBoth. Fitment is the same for all 2010-2024 Camaros; just confirm your front tire is 12 inches wide or less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-car-hauler-trailer-ramps\"\u003eMaxRamps Car Hauler \u0026amp; Trailer Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600435368219,"sku":"MXR-MRTX-5-CAMARO","price":408.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRTX-5_1_82252ffd-f72a-43dc-8cfa-a59770a46f18.jpg?v=1794426106"},{"product_id":"chevrolet-camaro-scale-ramps-with-platforms-maxramps-mrscale-p","title":"Chevrolet Camaro Scale Ramps with Platforms, MaxRamps MRSCALE-P, 2.5-Inch, Pair","description":"\u003ch1\u003eChevrolet Camaro Scale Ramps with Platforms, MaxRamps MRSCALE-P, 2.5-Inch\u003c\/h1\u003e\u003cp\u003eCorner balancing a Camaro for autocross or track days means getting all four tires onto the scale pads at exactly the same height. The MRSCALE-P is 2.5 inches tall to match standard 2.5-inch scale pads, with a ramp and a flat platform in one piece.\u003c\/p\u003e\u003cp\u003eUse them on the corners without a scale or as level spacers when you set ride height and alignment. They're a natural fit for 1LE cars and any Camaro on adjustable coilovers.\u003c\/p\u003e\u003cp\u003eThe pair weighs about 4 pounds. Made in the USA from foam with a polyurea coating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRSCALE-P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 2.5 inches, to match 2.5-inch scale pads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Ramp with platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 4 lb per pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow many do I need?\u003c\/strong\u003e\u003cbr\u003eWith a four-pad scale system, one pair gets the car up onto the pads and keeps it level. Some shops keep two pairs for setups and alignment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill a Camaro splitter clear 2.5 inches?\u003c\/strong\u003e\u003cbr\u003eAt 2.5 inches the climb is short and shallow, so most lowered Camaros roll on without touching.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIf you were looking at Race Ramps scale gear, the MRSCALE-P covers 2.5-inch scale pads and weighs about 4 pounds for the pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-jack-scale-ramps\"\u003eMaxRamps Jack \u0026amp; Scale Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600435892507,"sku":"MXR-MRSCALE-P-CAMARO","price":123.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRSCALE-P_1_8ae539e0-7b1e-4fd4-8114-9060a481f19a.jpg?v=1794426111"},{"product_id":"chevrolet-camaro-drive-up-ramp-extenders-maxramps-mr67-ext","title":"Chevrolet Camaro Drive-Up Ramp Extenders, MaxRamps MR67-EXT, for 67-Inch Ramps, Pair","description":"\u003ch1\u003eChevrolet Camaro Drive-Up Ramp Extenders, MaxRamps MR67-EXT, for 67-Inch Ramps\u003c\/h1\u003e\u003cp\u003eAlready have the 10-inch MR67-10 or MR67-10-SP, but your Camaro's front lip still touches? The MR67-EXT adds a 48-inch lead-in that drops the combined approach to 6.6 degrees.\u003c\/p\u003e\u003cp\u003eThat's the difference between scraping and clearing on a 6th gen ZL1, a 1LE, or any Camaro with an aftermarket front splitter.\u003c\/p\u003e\u003cp\u003eEach extender weighs about 4 pounds and is made in the USA from the same polyurea-coated foam as the main ramps.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-EXT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 48 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 6.6 degrees with MR67-10 or MR67-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e MaxRamps MR67-10 and MR67-10-SP (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 4 lb each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo these work alone?\u003c\/strong\u003e\u003cbr\u003eNo. They're lead-ins for the MR67-10 and MR67-10-SP, which are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need them on a stock Camaro?\u003c\/strong\u003e\u003cbr\u003eMany stock-height Camaros clear the 10.8-degree ramp on its own. Add the extenders if yours has a splitter, a lowered stance or a low aftermarket front lip.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps lists its Xtenders for the 56-inch ramps only. The MR67-EXT gives the 10-inch MR67 ramps a 6.6 degree climb, so you can have full height and a shallow approach together. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-ramp-extenders\"\u003eMaxRamps Ramp Extenders\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600436252955,"sku":"MXR-MR67-EXT-CAMARO","price":171.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/Extender_1_10c8e040-f6d2-4c23-a6d9-c09756d36828.jpg?v=1794426116"},{"product_id":"chevrolet-camaro-jack-ramps-maxramps-mrjr","title":"Chevrolet Camaro Jack Ramps, MaxRamps MRJR, 3-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Jack Ramps, MaxRamps MRJR, 3-Inch Lift\u003c\/h1\u003e\u003cp\u003eGetting a floor jack under the front of a lowered Camaro can be a fight. Drive onto the MRJR and the car comes up 3 inches, which is often all it takes to slide a low-profile jack under the front crossmember.\u003c\/p\u003e\u003cp\u003eThe 30-inch ramp has a 7.8-degree approach, so it clears the front lip on most 5th and 6th gen cars. Its one-piece design is about as simple as garage gear gets.\u003c\/p\u003e\u003cp\u003eMade in the USA from foam with a polyurea coating, rated for 3,500 lb per pair.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MRJR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 30 x 12 x 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 7.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 3,500 lb per pair, for vehicles up to 7,000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eCan I work under the car on these?\u003c\/strong\u003e\u003cbr\u003eNo. These lift the car just enough to get a jack under it. Once it's jacked up, support it on jack stands before you go underneath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre they wide enough for my tires?\u003c\/strong\u003e\u003cbr\u003eThe platform is 12 inches wide. Measure your front tire if you run an unusually wide setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps does not list a dedicated jack ramp in its drive-up line. The MRJR is built for exactly that job on a low Camaro. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-jack-scale-ramps\"\u003eMaxRamps Jack \u0026amp; Scale Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600436678939,"sku":"MXR-MRJR-CAMARO","price":123.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MRJR_1_ee0dda21-fc12-4872-a0b4-f1954697b4cd.jpg?v=1794426122"},{"product_id":"chevrolet-camaro-drive-up-ramp-extenders-maxramps-mr56-ext","title":"Chevrolet Camaro Drive-Up Ramp Extenders, MaxRamps MR56-EXT, 45-Inch, Pair","description":"\u003ch1\u003eChevrolet Camaro Drive-Up Ramp Extenders, MaxRamps MR56-EXT, 45-Inch\u003c\/h1\u003e\u003cp\u003eThe MR56-EXT turns an 8-inch MR56-8 or MR56-8-SP into a low-angle setup. Adding the 45-inch extender brings the combined approach down from 10.8 to 6.6 degrees.\u003c\/p\u003e\u003cp\u003eIf your Camaro scrapes the front fascia or splitter on the standard ramp, this is the fix. You don't have to replace the ramps you already own.\u003c\/p\u003e\u003cp\u003eEach extender weighs about 4.5 pounds. Made in the USA from polyurea-coated foam.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-EXT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 45 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 6.6 degrees with MR56-8 or MR56-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e MaxRamps MR56-8 and MR56-8-SP (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 4.5 lb each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these fit my MR67 ramps?\u003c\/strong\u003e\u003cbr\u003eNo. They're sized for the 56-inch ramps. For the MR67-10 or MR67-10-SP, use the MR67-EXT.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo they lock on?\u003c\/strong\u003e\u003cbr\u003eThey butt up against the front of the main ramp and stay put thanks to the grippy coating. Drive up slowly and straight.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. These do the same job as the Race Ramps RR-EX-12 Xtenders, bringing 56-inch ramps down to 6.6 degrees, and weigh about 4.5 pounds each against 10. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-ramp-extenders\"\u003eMaxRamps Ramp Extenders\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600437039387,"sku":"MXR-MR56-EXT-CAMARO","price":166.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/Extender_4_b9cea65b-f8a7-4202-87f9-99f9374daa03.jpg?v=1794426127"},{"product_id":"chevrolet-camaro-low-angle-split-drive-up-ramps-maxramps-mr80-10-sp","title":"Chevrolet Camaro Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch, 10-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch, 10-Inch Lift\u003c\/h1\u003e\u003cp\u003eThe MR80-10-SP is the one to get if your Camaro is low and you want a full 10 inches of working height. Its 80-inch length brings the approach angle down to 8 degrees without extenders, so a ZL1 or 1LE splitter clears on the way up.\u003c\/p\u003e\u003cp\u003eOnce the car is on the platform, pull the incline section out and you have open space around the front wheels for brake, suspension and wheel work. The platform has a mild cradle that holds the tire in place.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 18 pounds. Made in the USA from solid foam with a polyurea coating.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR80-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 80 x 14 x 10 inches assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 18 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e Mild tire cradle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eMR80-10-SP or MR67-10-SP with extenders?\u003c\/strong\u003e\u003cbr\u003eBoth get a low car up 10 inches. The MR80-10-SP does it in one 80-inch ramp at 8 degrees. The MR67-10-SP with MR67-EXT goes even lower at 6.6 degrees but takes up more floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit a 5th gen?\u003c\/strong\u003e\u003cbr\u003eYes. Every 2010-2024 Camaro fits as long as the front tire is 12 inches wide or less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRace Ramps does not make a direct match. Its 10-inch RR-XT climbs at 10.8 degrees, while the MR80-10-SP gets to the same 10 inches at 8 degrees with no extenders, which is what a ZL1 nose needs. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-drive-up-service-ramps\"\u003eMaxRamps Drive-Up Service Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600437629211,"sku":"MXR-MR80-10-SP-CAMARO","price":631.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/chevrolet-camaro-maxramps-low-angle-split-ramps-2_618e3af6-a510-49c4-8af2-a5deb658646f.jpg?v=1794426133"},{"product_id":"chevrolet-camaro-split-drive-up-service-ramps-maxramps-mr67-10-sp","title":"Chevrolet Camaro Split Drive-Up Service Ramps, MaxRamps MR67-10-SP, 67-Inch, 10-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Split Drive-Up Service Ramps, MaxRamps MR67-10-SP, 67-Inch, 10-Inch Lift\u003c\/h1\u003e\u003cp\u003eThe MR67-10-SP lifts your Camaro 10 inches and then gets out of the way. Drive up, set the brake, and slide the incline section out. You get full access around the front wheels for pads, rotors, control arms and tie rods.\u003c\/p\u003e\u003cp\u003eThe base approach is 10.8 degrees, fine for most stock-height V6, LT and SS cars. Add the MR67-EXT and it drops to 6.6 degrees for lowered cars and ZL1s with the factory splitter.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 18 pounds. Made in the USA from polyurea-coated foam that won't slide on a smooth garage floor.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 67 x 14 x 10 inches assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR67-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 18 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs 10 inches enough for an oil change?\u003c\/strong\u003e\u003cbr\u003eYes, with room to spare. Ten inches is enough working height for exhaust, transmission and suspension work too.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSplit or one-piece?\u003c\/strong\u003e\u003cbr\u003eGo split if you'll be working around the wheels. If you mostly do oil changes and underbody work, the one-piece MR67-10 costs less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. It matches the two-piece Race Ramps XT on length, lift, approach angle and tire width, and carries a 1,750-pound rating per ramp against Race Ramps' 1,500. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-drive-up-service-ramps\"\u003eMaxRamps Drive-Up Service Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600438055195,"sku":"MXR-MR67-10-SP-CAMARO","price":460.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/chevrolet-camaro-maxramps-split-service-ramps-3_c43dcf17-d361-43e2-849e-30634900492f.jpg?v=1794426139"},{"product_id":"chevrolet-camaro-low-angle-split-drive-up-ramps-maxramps-mr72-8-sp","title":"Chevrolet Camaro Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch, 8-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch, 8-Inch Lift\u003c\/h1\u003e\u003cp\u003eThe MR72-8-SP is built for lowered Camaros. It spreads 8 inches of lift over 72 inches for a 6.8-degree approach, so you get low-car clearance right out of the box without buying extenders.\u003c\/p\u003e\u003cp\u003eThe split design lets you pull the incline once the car is up, which opens up room for brake jobs and suspension work. The 12-inch-wide platform takes tires up to 10 inches wide.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 12 pounds. Made in the USA from polyurea-coated foam.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR72-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 72 x 12 x 8 inches assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 6.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill my ZL1 fit?\u003c\/strong\u003e\u003cbr\u003eMaybe not. ZL1 and 1LE cars run wide front tires that can go past the 10-inch limit. For those, look at the MR80-10-SP or MR67-10-SP, which take tires up to 12 inches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGood for a V6 or SS?\u003c\/strong\u003e\u003cbr\u003eYes. Most V6, LT and SS front tires fall within the 10-inch width. Check your sidewall to be sure.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. Race Ramps uses the same 72-inch length to reach a 6.8 degree approach. The MR72-8-SP matches that angle, adds a removable incline, and is rated at 1,750 pounds per ramp. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-drive-up-service-ramps\"\u003eMaxRamps Drive-Up Service Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600438481179,"sku":"MXR-MR72-8-SP-CAMARO","price":446.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/chevrolet-camaro-maxramps-low-angle-split-ramps-2_b91795d4-d030-44d5-ac8d-f0b305b48860.jpg?v=1794426145"},{"product_id":"chevrolet-camaro-split-drive-up-service-ramps-maxramps-mr56-8-sp","title":"Chevrolet Camaro Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch, 8-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch, 8-Inch Lift\u003c\/h1\u003e\u003cp\u003eThe MR56-8-SP is the compact split ramp for a home garage. It gives your Camaro 8 inches of lift for oil changes and underbody work, and the incline pulls away so you can reach the front wheels and brakes.\u003c\/p\u003e\u003cp\u003eStock it's 10.8 degrees. Add the MR56-EXT extenders and it drops to 6.6 degrees, which suits lowered 5th and 6th gen cars.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 12 pounds. Four pieces, sold as a pair, made in the USA from polyurea-coated foam.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 56 x 12 x 8 inches assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR56-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these fit my tires?\u003c\/strong\u003e\u003cbr\u003eThe max tire width is 10 inches. That covers most V6, LT and SS Camaros, but ZL1 and 1LE front tires can be wider, so check your sidewall first.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMR56-8-SP or MR56-8?\u003c\/strong\u003e\u003cbr\u003eSame lift and angle. The split version lets you remove the incline for wheel access; the one-piece MR56-8 is lighter and costs less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. It lines up with the two-piece Race Ramps RR-56-2 on length, lift, approach angle and tire width, and MaxRamps rates each ramp at 1,750 pounds versus 1,500 for Race Ramps. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-drive-up-service-ramps\"\u003eMaxRamps Drive-Up Service Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600438939931,"sku":"MXR-MR56-8-SP-CAMARO","price":332.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/chevrolet-camaro-maxramps-split-service-ramps-3_2d2cc371-2c23-49c8-9655-e4885e0ea17c.jpg?v=1794426150"},{"product_id":"chevrolet-camaro-drive-up-service-ramps-maxramps-mr67-10","title":"Chevrolet Camaro Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift\u003c\/h1\u003e\u003cp\u003eThe MR67-10 puts your Camaro 10 inches in the air on a single solid ramp. That's enough room for an oil change on a 6.2L LT1 or LT4, a driveshaft or exhaust swap, or a look at the rear suspension, with no jack stands to set.\u003c\/p\u003e\u003cp\u003eThe 14-inch-wide platform takes tires up to 12 inches wide, so it handles wider performance tires too. The approach is 10.8 degrees, or 6.6 degrees with the MR67-EXT extenders for splitter-equipped and lowered cars.\u003c\/p\u003e\u003cp\u003eEach one-piece ramp weighs about 16 pounds. Made in the USA from polyurea-coated foam that grips the floor and the tire.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 67 x 14 x 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR67-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 16 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill my Camaro scrape?\u003c\/strong\u003e\u003cbr\u003eStock-height cars usually clear the 10.8-degree ramp. A ZL1, 1LE or lowered car should add the MR67-EXT extenders or go with the 80-inch MR80-10-SP.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMR67-10 or MR67-10-SP?\u003c\/strong\u003e\u003cbr\u003eSame height and width. The split MR67-10-SP lets you pull the incline out for wheel and brake access.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes, and it is the one most ZL1 and 1LE owners compare against the Race Ramps RR-XT. Both are 67 inches long with 10 inches of lift, a 10.8 degree approach and a 12-inch tire limit. The MR67-10 is about a pound lighter per ramp and rated for 1,750 pounds per ramp instead of 1,500. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-drive-up-service-ramps\"\u003eMaxRamps Drive-Up Service Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600439628059,"sku":"MXR-MR67-10-CAMARO","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/chevrolet-camaro-maxramps-drive-up-service-ramps-1_f8371e05-2b01-4440-8ca1-82c2e49f73dc.jpg?v=1794426157"},{"product_id":"chevrolet-camaro-drive-up-service-ramps-maxramps-mr56-8","title":"Chevrolet Camaro Drive-Up Service Ramps, MaxRamps MR56-8, 56-Inch One-Piece, 8-Inch Lift, Pair","description":"\u003ch1\u003eChevrolet Camaro Drive-Up Service Ramps, MaxRamps MR56-8, 56-Inch One-Piece, 8-Inch Lift\u003c\/h1\u003e\u003cp\u003eThe MR56-8 is the easiest way to get your Camaro up for routine maintenance. Drive on, and the car is 8 inches up on a solid platform, ready for an oil change, a fluid check or an underbody inspection.\u003c\/p\u003e\u003cp\u003eIt's 56 inches long with a 10.8-degree approach. Add the MR56-EXT extenders if your Camaro is lowered or the front lip is close to the ground.\u003c\/p\u003e\u003cp\u003eAt about 10 pounds per ramp, these hang on a garage wall and come down in seconds. Made in the USA from polyurea-coated foam.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize per ramp:\u003c\/strong\u003e 56 x 12 x 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR56-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 10 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid-core high-density EPS foam with a polyurea coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these fit a ZL1?\u003c\/strong\u003e\u003cbr\u003eZL1 and 1LE front tires can run wider than 10 inches. For those cars, the 12-inch-wide MR67-10 is the safer pick.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre foam ramps strong enough?\u003c\/strong\u003e\u003cbr\u003eYes. They're rated for 1,750 lb per ramp on vehicles up to 7,000 lb, and a Camaro is well under that.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a good alternative to Race Ramps?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. It is the same size and shape as the Race Ramps RR-56, 56 inches long with 8 inches of lift and a 10.8 degree approach, and it takes the same 10-inch tires. MaxRamps rates it higher, at 1,750 pounds per ramp against 1,500. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.\u003c\/p\u003e\u003ch3\u003eKeep Shopping\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/chevrolet-camaro-car-ramps\"\u003eChevrolet Camaro Car Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/maxramps-drive-up-service-ramps\"\u003eMaxRamps Drive-Up Service Ramps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54600440054043,"sku":"MXR-MR56-8-CAMARO","price":299.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/chevrolet-camaro-maxramps-drive-up-service-ramps-1_ff73e3e1-fd1e-4511-872e-9933b9987303.jpg?v=1794426162"}],"url":"https:\/\/www.radiantspeedworks.com\/collections\/chevrolet-camaro-car-ramps.oembed","provider":"Radiant Speed Works","version":"1.0","type":"link"}