{"title":"Drive-Up Service Ramps","description":"\u003cp\u003eDrive-up service ramps get the front of the car 8 or 10 inches off the floor without a jack, which makes oil changes, underbody inspections and brake work faster and safer. MaxRamps offers one-piece ramps and two-piece split ramps. With the split ramps, you remove the incline once the car is up to get side access to the wheels.\u003c\/p\u003e\u003cp\u003eThe 56 and 72-inch ramps are 12 inches wide for tires up to 10 inches. The 67 and 80-inch ramps are 14 inches wide for tires up to 12 inches. For the lowest cars, the 72 and 80-inch ramps or the add-on extenders bring the approach down to between 6.6 and 8 degrees.\u003c\/p\u003e","products":[{"product_id":"c8-corvette-drive-up-service-ramps-maxramps-mr56-8","title":"C8 Corvette Drive-Up Service Ramps, MaxRamps MR56-8, 56-Inch One-Piece, 8-Inch Lift, Pair","description":"\u003ch1\u003eC8 Corvette Drive-Up Service Ramps, MaxRamps MR56-8, 56-Inch One-Piece\u003c\/h1\u003e\u003cp\u003eFloor jacks and a C8 do not get along. The jacking points are hard to reach under a low nose, and you still end up putting the car on stands. The MR56-8 lets you drive the front wheels up 8 inches instead, which is plenty of room for an oil change, a skid plate swap or a quick look underneath.\u003c\/p\u003e\u003cp\u003eThis is the compact, one-piece version: 56 inches long, 12 inches wide, with a 10.8 degree incline and a weight of about 10 pounds per ramp. It stores flat against a garage wall and does not slide around on a sealed floor the way plastic ramps tend to.\u003c\/p\u003e\u003cp\u003eIf you need a gentler approach for a lowered car or an aftermarket splitter, add the MR56-EXT extenders. They sit on top of the incline and bring the angle down to 6.6 degrees.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 56 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR56-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 10 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 ramps)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill my front tires fit?\u003c\/strong\u003e\u003cbr\u003eA Stingray runs 245 mm front tires, about 9.6 inches wide, which fits the 10-inch rating. Z06, E-Ray and ZR1 fronts are 275 mm, about 10.8 inches, so those cars should step up to the 14-inch-wide MR67-10.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne-piece or split?\u003c\/strong\u003e\u003cbr\u003eOne-piece is simpler and lighter. The split MR56-8-SP lets you pull the incline away once the car is up, which opens up side access.\u003c\/p\u003e\u003ch2\u003eFitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596550131995,"sku":"MXR-MR56-8","price":299.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/max-ramps-corvette-6.png?v=1794399619"},{"product_id":"c8-corvette-split-drive-up-service-ramps-maxramps-mr56-8-sp","title":"C8 Corvette Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch, 8-Inch Lift, Pair","description":"\u003ch1\u003eC8 Corvette Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch\u003c\/h1\u003e\u003cp\u003eThe MR56-8-SP gives you the same 8-inch lift and 56-inch footprint as the one-piece MR56-8, but the incline separates from the platform. Drive up, set the brake, chock the rear wheels, then pull the incline sections away so you can roll a creeper in from the side.\u003c\/p\u003e\u003cp\u003eThat side access is the reason to spend a little more on the split design. On a C8 it makes front brake work, wheel well inspections and underbody panel removal much easier, because you are not reaching over the ramp to get to anything.\u003c\/p\u003e\u003cp\u003eEach assembled ramp is 12 inches wide with a 10.8 degree climb. The MR56-EXT extenders lay on top of the incline when you need a gentler 6.6 degree approach.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 56 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR56-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs it safe to remove the incline with the car on it?\u003c\/strong\u003e\u003cbr\u003eYes, that is what it is designed for. Always set the parking brake and chock the wheels still on the ground before you get under the car.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo these fit Z06 front tires?\u003c\/strong\u003e\u003cbr\u003eThe tire limit is 10 inches. Z06, E-Ray and ZR1 front tires are about 10.8 inches wide, so the 14-inch-wide MR67-10-SP is the better fit for those cars.\u003c\/p\u003e\u003ch2\u003eFitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596550656283,"sku":"MXR-MR56-8-SP","price":332.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/max-ramps-corvette-5.png?v=1794399626"},{"product_id":"c8-corvette-drive-up-service-ramps-maxramps-mr67-10","title":"C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair","description":"\u003ch1\u003eC8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece\u003c\/h1\u003e\u003cp\u003eTen inches of lift is where under-car work stops being a chore. The MR67-10 raises the front of a C8 high enough to work comfortably from a low creeper, and it does it with a 67-inch one-piece ramp that weighs about 16 pounds.\u003c\/p\u003e\u003cp\u003eThese are 14 inches wide and rated for tires up to 12 inches, so they take the wider 275 mm front tires on a Z06, E-Ray or ZR1 as well as Stingray fronts. The incline is 10.8 degrees, and if your car is lowered or wearing a deeper splitter, the MR67-EXT extenders bring that down to 6.6 degrees.\u003c\/p\u003e\u003cp\u003eMaxRamps builds these from solid foam with a polyurea coating, so they will not crack in the cold, slide on epoxy floors or rust in a damp garage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 67 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR67-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 16 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 ramps)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill my splitter clear?\u003c\/strong\u003e\u003cbr\u003eMost stock C8s clear with the front lift raised. If you run a lower setup, measure 36 inches out from the front tire and compare your height to the chart in the photos, or add the MR67-EXT extenders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I get the split version?\u003c\/strong\u003e\u003cbr\u003eGet the MR67-10-SP if you want to remove the incline for side access to the wheels and brakes. The one-piece is lighter and simpler.\u003c\/p\u003e\u003ch2\u003eFitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596551213339,"sku":"MXR-MR67-10","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/max-ramps-corvette-4.png?v=1794399633"},{"product_id":"c8-corvette-split-drive-up-service-ramps-maxramps-mr67-10-sp","title":"C8 Corvette Split Drive-Up Service Ramps, MaxRamps MR67-10-SP, 67-Inch, 10-Inch Lift, Pair","description":"\u003ch1\u003eC8 Corvette Split Drive-Up Service Ramps, MaxRamps MR67-10-SP, 67-Inch\u003c\/h1\u003e\u003cp\u003eThe MR67-10-SP is the full-size garage ramp for C8 owners who do their own work. You get a 10-inch lift, a 14-inch-wide platform that takes tires up to 12 inches wide, and a two-piece split design that lets you remove the incline once the car is up.\u003c\/p\u003e\u003cp\u003eRemoving the incline clears the area in front of and beside the wheel, which is what you want for brake pad swaps, rotor work, front fascia removal or detailing the inner fender liners. The set ships as four pieces that make two ramps, so they also break down smaller for storage and transport.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 18 pounds. The approach is 10.8 degrees, and the MR67-EXT extenders lay over the incline to drop it to 6.6 degrees for lowered cars.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 67 x 14 inches, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees (6.6 degrees with MR67-EXT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 18 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these work for a Z06?\u003c\/strong\u003e\u003cbr\u003eYes. Z06, E-Ray and ZR1 front tires are about 10.8 inches wide, inside the 12-inch rating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo the pieces lock together?\u003c\/strong\u003e\u003cbr\u003eThe incline seats into the platform for the drive-up, then lifts away once the car is parked. Always chock the rear wheels before working under the car.\u003c\/p\u003e\u003ch2\u003eFitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596551737627,"sku":"MXR-MR67-10-SP","price":460.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/max-ramps-corvette-3.png?v=1794399639"},{"product_id":"c8-corvette-low-angle-split-drive-up-ramps-maxramps-mr72-8-sp","title":"C8 Corvette Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch, 8-Inch Lift, Pair","description":"\u003ch1\u003eC8 Corvette Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch\u003c\/h1\u003e\u003cp\u003eThe MR72-8-SP is built for the lowest cars in the garage. It stretches an 8-inch lift over 72 inches of ramp, which gives you a 6.8 degree incline right out of the box with no extenders needed.\u003c\/p\u003e\u003cp\u003eMaxRamps aims this ramp at sports cars with splitters or lowered suspension, and a C8 with an aftermarket front lip or a lowered stance is a perfect match. The split design lets you pull the incline away once the car is up, so the long ramp does not get in your way while you work.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 12 pounds and is 12 inches wide, with a recommended max tire width of 10 inches.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR72-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 72 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 6.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWho should buy this over the MR56-8 with extenders?\u003c\/strong\u003e\u003cbr\u003eIf you know you need a low angle every time, the MR72-8-SP is one ramp to set out instead of two pieces stacked together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit Z06 front tires?\u003c\/strong\u003e\u003cbr\u003eThe tire limit is 10 inches. Stingray fronts fit. Z06, E-Ray and ZR1 fronts are about 10.8 inches wide, so the 14-inch-wide MR80-10-SP is the low-angle choice for those cars.\u003c\/p\u003e\u003ch2\u003eFitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596552392987,"sku":"MXR-MR72-8-SP","price":446.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/max-ramps-corvette-2.png?v=1794399646"},{"product_id":"c8-corvette-low-angle-split-drive-up-ramps-maxramps-mr80-10-sp","title":"C8 Corvette Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch, 10-Inch Lift, Pair","description":"\u003ch1\u003eC8 Corvette Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch\u003c\/h1\u003e\u003cp\u003eThis is the top of the MaxRamps drive-up line. The MR80-10-SP gives you a full 10 inches of lift on an 80-inch ramp, with an 8 degree incline that a low C8 can climb without the splitter touching.\u003c\/p\u003e\u003cp\u003eIt is also 14 inches wide with a 12-inch tire rating, so it handles the wider fronts on a Z06, E-Ray or ZR1. If you want the most working room under the car and the gentlest climb you can get at 10 inches, this is the one.\u003c\/p\u003e\u003cp\u003eThe split design lets you remove the incline after the car is up. Each assembled ramp weighs about 18 pounds and breaks down into two pieces for storage.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR80-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 80 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 18 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow much floor space do these need?\u003c\/strong\u003e\u003cbr\u003ePlan on about 80 inches in front of each front tire for the drive-up. Once the car is up, the incline comes off and the footprint shrinks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 8 degrees low enough for my car?\u003c\/strong\u003e\u003cbr\u003eMeasure 36 inches out from the front tire to the lowest point of the nose, then match that height to the chart in the photos. Most C8s, including Z06s with the front lift raised, are well inside it.\u003c\/p\u003e\u003ch2\u003eFitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596552917275,"sku":"MXR-MR80-10-SP","price":631.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/max-ramps-corvette-1.png?v=1794399653"},{"product_id":"ford-bronco-drive-up-service-ramps-maxramps-mr56-8","title":"Ford Bronco Drive-Up Service Ramps, MaxRamps MR56-8, 56-Inch One-Piece, 8-Inch Lift, Pair","description":"\u003ch1\u003eFord Bronco Drive-Up Service Ramps, MaxRamps MR56-8, 56-Inch One-Piece\u003c\/h1\u003e\u003cp\u003eA Bronco has plenty of ground clearance, but crawling under one for an oil change or a skid plate inspection is still easier with the front end up. The MR56-8 drives the front tires up 8 inches on a compact 56-inch ramp, no jack required.\u003c\/p\u003e\u003cp\u003eAt about 10 pounds per ramp, these are far lighter than the steel and plastic ramps sold at parts stores, and the polyurea-coated foam grips aggressive tread without chewing it up. They hang on a garage wall and go in the cargo area for trail trips without taking over the space.\u003c\/p\u003e\u003cp\u003ePay attention to tire width. These are 12 inches wide with a 10-inch tire rating, which covers the narrower factory Bronco tires. Trucks on 315 Sasquatch tires or wider aftermarket rubber should go with the 14-inch-wide MR67-10 or MR80-10-SP.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 56 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 10 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 ramps)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these hold a Bronco?\u003c\/strong\u003e\u003cbr\u003eThe ramps carry one axle, not the whole truck. MaxRamps rates the pair at 3,500 lb combined for vehicles up to 7,000 lb, which covers every 2021 and newer Bronco.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill my Sasquatch tires fit?\u003c\/strong\u003e\u003cbr\u003eNo. 315 mm tires are about 12.4 inches wide, past the 10-inch limit. Choose the 14-inch-wide ramps instead.\u003c\/p\u003e\u003ch2\u003eFitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596555047195,"sku":"MXR-MR56-8-BRONCO","price":299.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/maxramps-bronco-2.png?v=1794399685"},{"product_id":"ford-bronco-split-drive-up-service-ramps-maxramps-mr56-8-sp","title":"Ford Bronco Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch, 8-Inch Lift, Pair","description":"\u003ch1\u003eFord Bronco Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch\u003c\/h1\u003e\u003cp\u003eThe split version of the 56-inch MaxRamps is handy on a Bronco because so much of the work happens around the front wheels: tie rods, sway bar end links, brake pads and steering stabilizer swaps. Drive up, chock the rear, then remove the incline pieces so you can get in from the side.\u003c\/p\u003e\u003cp\u003eEach assembled ramp gives you 8 inches of lift with a 10.8 degree climb, and weighs about 12 pounds. The four pieces break down smaller than a one-piece ramp, so they pack easily into the cargo area.\u003c\/p\u003e\u003cp\u003eThese are 12 inches wide with a 10-inch tire limit. That works with narrower factory tires. If your Bronco runs 315s or larger, choose the 14-inch-wide MR67-10-SP or MR80-10-SP.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR56-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 56 x 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eAre foam ramps strong enough for a truck?\u003c\/strong\u003e\u003cbr\u003eThey are rated at 1,750 lb per ramp, and they only carry the front axle. That is more than enough for a Bronco front end.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I take them on the trail?\u003c\/strong\u003e\u003cbr\u003eYes. They are light and break down into two pieces each, which makes them easy to pack.\u003c\/p\u003e\u003ch2\u003eFitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596555440411,"sku":"MXR-MR56-8-SP-BRONCO","price":332.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/maxramps-bronco-1.png?v=1794399691"},{"product_id":"ford-bronco-drive-up-service-ramps-maxramps-mr67-10","title":"Ford Bronco Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair","description":"\u003ch1\u003eFord Bronco Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece\u003c\/h1\u003e\u003cp\u003eFor most Bronco owners this is the ramp to buy. The MR67-10 is 14 inches wide, rated for tires up to 12 inches, and lifts the front of the truck 10 inches on a single 67-inch ramp that weighs about 16 pounds.\u003c\/p\u003e\u003cp\u003eTen inches on top of a Bronco's stock clearance gives you real working room for oil and filter changes, front differential service and checking the steering linkage after a rough trail day. The one-piece design is simple: drive up, set the brake, chock the rear and go to work.\u003c\/p\u003e\u003cp\u003eFactory tires up to the 285s fit inside the 12-inch rating. 315 Sasquatch tires are about 12.4 inches wide, a hair over MaxRamps' recommendation, so check your tread width before you order.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 67 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 16 lb per ramp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e One-piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (2 ramps)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill these slide on my garage floor?\u003c\/strong\u003e\u003cbr\u003eThe polyurea coating grips both the tire and the floor much better than hard plastic ramps.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne-piece or split?\u003c\/strong\u003e\u003cbr\u003ePick the MR67-10-SP if you want to remove the incline for side access to the wheels.\u003c\/p\u003e\u003ch2\u003eFitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596555833627,"sku":"MXR-MR67-10-BRONCO","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/3d85a086-7a35-4b76-91f7-7e8585cda849.png?v=1794399697"},{"product_id":"ford-bronco-split-drive-up-service-ramps-maxramps-mr67-10-sp","title":"Ford Bronco Split Drive-Up Service Ramps, MaxRamps MR67-10-SP, 67-Inch, 10-Inch Lift, Pair","description":"\u003ch1\u003eFord Bronco Split Drive-Up Service Ramps, MaxRamps MR67-10-SP, 67-Inch\u003c\/h1\u003e\u003cp\u003eThe MR67-10-SP pairs a 10-inch lift with a removable incline, which is the combination you want for front-end work on a Bronco. Drive up, pull the incline pieces away, and you have open access to the wheel, brake caliper and the front suspension from the side.\u003c\/p\u003e\u003cp\u003eEach assembled ramp is 14 inches wide, rated for tires up to 12 inches, and weighs about 18 pounds. The set is four pieces total, so it packs down for the cargo area or a shelf in the garage.\u003c\/p\u003e\u003cp\u003eThe polyurea-coated foam will not rust like steel ramps or crack in the cold like cheap plastic, and it is easy to hose off after a muddy weekend.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR67-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 67 x 14 inches, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 10.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 18 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDo I need to remove the incline?\u003c\/strong\u003e\u003cbr\u003eNo. You can leave it in place for jobs underneath. Remove it when you need to get at the wheels from the side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill my lifted Bronco fit?\u003c\/strong\u003e\u003cbr\u003eHeight is not the issue, tire width is. MaxRamps recommends tires up to 12 inches wide on this ramp.\u003c\/p\u003e\u003ch2\u003eFitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596556194075,"sku":"MXR-MR67-10-SP-BRONCO","price":460.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/maxramps-bronco-3.png?v=1794399703"},{"product_id":"ford-bronco-low-angle-split-drive-up-ramps-maxramps-mr72-8-sp","title":"Ford Bronco Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch, 8-Inch Lift, Pair","description":"\u003ch1\u003eFord Bronco Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch\u003c\/h1\u003e\u003cp\u003eThe MR72-8-SP spreads an 8-inch lift over 72 inches, for a 6.8 degree incline. On a Bronco that gentle climb means less wheel spin on a slick garage floor and a smoother roll up, which is handy for trucks on aggressive mud-terrain tread.\u003c\/p\u003e\u003cp\u003eIt is a split design, so the incline comes off once the truck is up and the ramp shrinks to just the platform under the tire. Each assembled ramp weighs about 12 pounds.\u003c\/p\u003e\u003cp\u003eThese ramps are 12 inches wide with a 10-inch tire limit, so they fit narrower factory Bronco tires. If you run 315s or bigger, go with the 14-inch-wide MR80-10-SP.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR72-8-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 72 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 6.8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 12 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhy a low angle ramp on a truck?\u003c\/strong\u003e\u003cbr\u003eA shallow climb takes less throttle, which makes it easier to stop exactly on the platform and keeps the ramp from being pushed across the floor.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the Bronco front bumper clear?\u003c\/strong\u003e\u003cbr\u003eWith 8 inches of lift and a 6.8 degree climb, factory and most aftermarket Bronco bumpers clear easily.\u003c\/p\u003e\u003ch2\u003eFitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596556849435,"sku":"MXR-MR72-8-SP-BRONCO","price":446.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/maxramps-bronco-5.png?v=1794399710"},{"product_id":"ford-bronco-low-angle-split-drive-up-ramps-maxramps-mr80-10-sp","title":"Ford Bronco Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch, 10-Inch Lift, Pair","description":"\u003ch1\u003eFord Bronco Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch\u003c\/h1\u003e\u003cp\u003eThe MR80-10-SP is the biggest drive-up ramp MaxRamps makes, and it is the best fit for Broncos on bigger tires. It is 14 inches wide with a 12-inch tire rating, gives you a full 10 inches of lift, and keeps the incline to 8 degrees by stretching it over 80 inches.\u003c\/p\u003e\u003cp\u003eThat combination lets a Bronco roll up smoothly instead of lurching onto a short, steep ramp, and once the truck is parked the incline comes off for side access to the wheels and brakes.\u003c\/p\u003e\u003cp\u003eEach assembled ramp weighs about 18 pounds. Like every MaxRamps product it is solid foam with a polyurea coating and is made in the USA.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaxRamps part number:\u003c\/strong\u003e MR80-10-SP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength x width:\u003c\/strong\u003e 80 x 14 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift:\u003c\/strong\u003e 10 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproach angle:\u003c\/strong\u003e 8 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax tire width:\u003c\/strong\u003e 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e About 18 lb per ramp, assembled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign:\u003c\/strong\u003e Two-piece split, removable incline\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Solid core high density EPS foam with a polyurea skin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12-month limited warranty from MaxRamps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e Pair (4 pieces total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCommon Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWill 35-inch tires fit?\u003c\/strong\u003e\u003cbr\u003eDiameter is not a problem on a drive-up ramp. Width is what matters. MaxRamps recommends tires up to 12 inches wide, and 315s are about 12.4 inches, so measure your actual tread width.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow much room do I need?\u003c\/strong\u003e\u003cbr\u003ePlan on roughly 80 inches in front of each tire for the drive-up.\u003c\/p\u003e\u003ch2\u003eFitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door\u003c\/h2\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":54596557570331,"sku":"MXR-MR80-10-SP-BRONCO","price":631.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/maxramps-bronco-4.png?v=1794399716"}],"url":"https:\/\/www.radiantspeedworks.com\/collections\/maxramps-drive-up-service-ramps.oembed","provider":"Radiant Speed Works","version":"1.0","type":"link"}