{"title":"Metro Packard Twelve Weatherstripping \u0026 Rubber Parts","description":"\u003cp\u003eMetro rubber restoration parts for the 1932-1938 Packard Twelve: 20 parts in all, including rubber restoration parts, bumpers \u0026amp; stops, hood \u0026amp; cowl seals and trunk seals. Every listing shows the exact years it fits, so you can match each part to your car before ordering.\u003c\/p\u003e\n\u003cp\u003eFresh rubber keeps an older Packard Twelve dry and quiet, stops rattles and squeaks, and makes doors, hoods and trunks close the way they did new. All Metro parts ship free from Radiant Speed Works.\u003c\/p\u003e","products":[{"product_id":"1933-1934-packard-custom-eight-1933-1934-packard-twelve-hood-corner-pads-metro-hc-21","title":"1933-1934 Packard Custom Eight, 1933-1934 Packard Twelve Hood-Corner Pads - Metro HC 21","description":"\u003ch1\u003e1933-1934 Packard Custom Eight, 1933-1934 Packard Twelve Hood-Corner Pads - Metro HC 21\u003c\/h1\u003e\n\u003cp\u003eHood and cowl seals keep water, fumes and engine heat from finding their way toward the cabin. Metro builds this seal for the 1933-1934 Packard Custom Eight and 1933-1934 Packard Twelve. Metro part number HC 21.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHood Corners.\u003c\/li\u003e\n\u003cli\u003e1-13\/16\" wide.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: HC 21\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eClean the mounting surface and test fit before attaching. Check hood alignment after installing, since a new seal can change how the hood sits at first.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Custom Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-hood-and-cowl-seals\"\u003eMetro Hood \u0026amp; Cowl Seals\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Custom Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54562747121947,"sku":"METRO-HC 21","price":98.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/HC21.jpg?v=1794198630"},{"product_id":"1934-packard-super-eight-1934-packard-twelve-rear-bumper-pad-metro-mp-831-a","title":"1934 Packard Super Eight, 1934 Packard Twelve Rear-Bumper Pad - Metro MP 831-A","description":"\u003ch1\u003e1934 Packard Super Eight, 1934 Packard Twelve Rear-Bumper Pad - Metro MP 831-A\u003c\/h1\u003e\n\u003cp\u003eRubber bumpers and stops keep doors, hoods and trunks from rattling and protect painted edges from metal-on-metal contact. Metro makes this part for the 1934 Packard Super Eight and 1934 Packard Twelve. Metro part number MP 831-A.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear Bumper Pad for LeBaron Boatail.\u003c\/li\u003e\n\u003cli\u003e1-3\/4\" wide X 3-7\/8\" long.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 831-A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003ePull or cut out the old bumper, clean the hole, and push the new one in place. A little soapy water or rubber lubricant makes installation easier.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-bumpers-and-stops\"\u003eMetro Bumpers \u0026amp; Stops\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1934 Packard Super Eight and 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54562827305243,"sku":"METRO-MP 831-A","price":84.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP831A.jpg?v=1794199082"},{"product_id":"1934-packard-super-eight-1934-packard-twelve-rear-bumper-pad-metro-mp-831-b","title":"1934 Packard Super Eight, 1934 Packard Twelve Rear-Bumper Pad - Metro MP 831-B","description":"\u003ch1\u003e1934 Packard Super Eight, 1934 Packard Twelve Rear-Bumper Pad - Metro MP 831-B\u003c\/h1\u003e\n\u003cp\u003eRubber bumpers and stops keep doors, hoods and trunks from rattling and protect painted edges from metal-on-metal contact. Metro makes this part for the 1934 Packard Super Eight and 1934 Packard Twelve. Metro part number MP 831-B.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTail-light Pads, for LeBaron Boatail.\u003c\/li\u003e\n\u003cli\u003e2-5\/8\" wide X 7-3\/4\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 831-B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003ePull or cut out the old bumper, clean the hole, and push the new one in place. A little soapy water or rubber lubricant makes installation easier.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-bumpers-and-stops\"\u003eMetro Bumpers \u0026amp; Stops\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1934 Packard Super Eight and 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54562828157211,"sku":"METRO-MP 831-B","price":204.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP831B.jpg?v=1794199087"},{"product_id":"1935-1938-packard-super-eight-1935-1938-packard-twelve-door-handle-pads-metro-mp-837","title":"1935-1938 Packard Super Eight, 1935-1938 Packard Twelve Door-Handle Pads - Metro MP 837","description":"\u003ch1\u003e1935-1938 Packard Super Eight, 1935-1938 Packard Twelve Door-Handle Pads - Metro MP 837\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1935-1938 Packard Super Eight and 1935-1938 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. Metro part number MP 837.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDoor Handle Pads.\u003c\/li\u003e\n\u003cli\u003e1-1\/4\" wide X 2-1\/4\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 837\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1935-1938 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1935-1938 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-body-and-trim-pads\"\u003eMetro Body \u0026amp; Trim Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1935, 1936, 1937, 1938 Packard Super Eight and 1935, 1936, 1937, 1938 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54562828812571,"sku":"METRO-MP 837","price":99.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP837.jpg?v=1794199092"},{"product_id":"1935-1938-packard-super-eight-1935-1938-packard-twelve-door-handle-pads-metro-mp-844-a","title":"1935-1938 Packard Super Eight, 1935-1938 Packard Twelve Door-Handle Pads - Metro MP 844-A","description":"\u003ch1\u003e1935-1938 Packard Super Eight, 1935-1938 Packard Twelve Door-Handle Pads - Metro MP 844-A\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1935-1938 Packard Super Eight and 1935-1938 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. Metro part number MP 844-A.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDoor Handle Pads.\u003c\/li\u003e\n\u003cli\u003e1-5\/8\" wide X 2-7\/8\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 844-A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1935-1938 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1935-1938 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-body-and-trim-pads\"\u003eMetro Body \u0026amp; Trim Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1935, 1936, 1937, 1938 Packard Super Eight and 1935, 1936, 1937, 1938 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54562829500699,"sku":"METRO-MP 844-A","price":91.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP844A.jpg?v=1794199097"},{"product_id":"1933-1934-packard-super-eight-1933-1934-packard-twelve-supersoft-headlight-pads-metro-mp-830","title":"1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Headlight Pads - Metro MP 830","description":"\u003ch1\u003e1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Headlight Pads - Metro MP 830\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1933-1934 Packard Super Eight and 1933-1934 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 830.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeadlight Pads.\u003c\/li\u003e\n\u003cli\u003e3-3\/4\" wide X 4-7\/8\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 830\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Super Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563919397147,"sku":"METRO-MP 830","price":129.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP830.jpg?v=1794207256"},{"product_id":"1933-1934-packard-super-eight-1933-1934-packard-twelve-supersoft-tail-light-pads-metro-mp-831","title":"1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 831","description":"\u003ch1\u003e1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 831\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1933-1934 Packard Super Eight and 1933-1934 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 831.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTail-light Pads.\u003c\/li\u003e\n\u003cli\u003e4-3\/4\" long X 1-3\/4\" wide.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 831\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Super Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563919659291,"sku":"METRO-MP 831","price":137.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP831.jpg?v=1794207260"},{"product_id":"1934-packard-super-eight-1934-packard-twelve-supersoft-rear-body-casting-pad-metro-mp-831-c","title":"1934 Packard Super Eight, 1934 Packard Twelve SUPERsoft Rear Body-Casting Pad - Metro MP 831-C","description":"\u003ch1\u003e1934 Packard Super Eight, 1934 Packard Twelve SUPERsoft Rear Body-Casting Pad - Metro MP 831-C\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1934 Packard Super Eight and 1934 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 831-C.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRear Body Casting Pad, for LeBaron Boatail.\u003c\/li\u003e\n\u003cli\u003e4-7\/8\" O.D.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 831-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-body-and-trim-pads\"\u003eMetro Body \u0026amp; Trim Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1934 Packard Super Eight and 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563919823131,"sku":"METRO-MP 831-C","price":106.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP831C.jpg?v=1794207265"},{"product_id":"1936-packard-eight-1936-packard-model-120-b-and-more-supersoft-side-arm-pad-metro-mp-835","title":"1936 Packard Eight, 1936 Packard Model 120-B and more SUPERsoft Side-Arm Pad - Metro MP 835","description":"\u003ch1\u003e1936 Packard Eight, 1936 Packard Model 120-B and more SUPERsoft Side-Arm Pad - Metro MP 835\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1936 Packard Eight, 1936 Packard Model 120-B, 1936 Packard Super Eight and 1936 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 835.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSide Arm Pad.\u003c\/li\u003e\n\u003cli\u003e1-1\/8\" wide X 3\" long.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 835\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1936 Packard Eight\u003c\/li\u003e\n\u003cli\u003e1936 Packard Model 120-B\u003c\/li\u003e\n\u003cli\u003e1936 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1936 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-body-and-trim-pads\"\u003eMetro Body \u0026amp; Trim Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1936 Packard Eight, 1936 Packard Model 120-B, 1936 Packard Super Eight and 1936 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563921101083,"sku":"METRO-MP 835","price":61.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP835.jpg?v=1794207284"},{"product_id":"1933-1934-packard-super-eight-1933-1934-packard-twelve-supersoft-tail-light-pads-metro-mp-840","title":"1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 840","description":"\u003ch1\u003e1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 840\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1933-1934 Packard Super Eight and 1933-1934 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 840.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTail-light Pads.\u003c\/li\u003e\n\u003cli\u003e3-3\/4\" wide X 8-7\/8\" long.\u003c\/li\u003e\n\u003cli\u003ePair R\u0026amp;L\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 840\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Super Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563922051355,"sku":"METRO-MP 840","price":166.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP840.jpg?v=1794207307"},{"product_id":"1935-1938-packard-super-eight-1935-1938-packard-twelve-supersoft-rumble-seat-step-plate-pad-metro-mp","title":"1935-1938 Packard Super Eight, 1935-1938 Packard Twelve SUPERsoft Rumble-Seat Step-Plate Pad - Metro MP 841","description":"\u003ch1\u003e1935-1938 Packard Super Eight, 1935-1938 Packard Twelve SUPERsoft Rumble-Seat Step-Plate Pad - Metro MP 841\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1935-1938 Packard Super Eight and 1935-1938 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 841.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRumble Seat Step-Plate Pad.\u003c\/li\u003e\n\u003cli\u003e3-1\/4\" wide X 5-5\/8\" long.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 841\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1935-1938 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1935-1938 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-body-and-trim-pads\"\u003eMetro Body \u0026amp; Trim Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1935, 1936, 1937, 1938 Packard Super Eight and 1935, 1936, 1937, 1938 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563922182427,"sku":"METRO-MP 841","price":75.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP841.jpg?v=1794207311"},{"product_id":"1935-1938-packard-super-eight-1935-1938-packard-twelve-supersoft-trunk-hinge-pads-metro-mp-843","title":"1935-1938 Packard Super Eight, 1935-1938 Packard Twelve SUPERsoft Trunk-Hinge Pads - Metro MP 843","description":"\u003ch1\u003e1935-1938 Packard Super Eight, 1935-1938 Packard Twelve SUPERsoft Trunk-Hinge Pads - Metro MP 843\u003c\/h1\u003e\n\u003cp\u003eA tired trunk seal is the most common reason for a wet trunk and rusted floor pans. This Metro trunk seal for the 1935-1938 Packard Super Eight and 1935-1938 Packard Twelve keeps water and exhaust fumes out. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 843.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTrunk Hinge Pads.\u003c\/li\u003e\n\u003cli\u003e1-3\/4\" wide X 8-1\/8\" long.\u003c\/li\u003e\n\u003cli\u003eCut to fit.\u003c\/li\u003e\n\u003cli\u003eSet\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 843\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eScrape off the old seal and adhesive, treat any rust in the channel, and clean it with a wax and grease remover. Start the new seal at the center of the latch area so the joint ends up at the bottom, and use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1935-1938 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1935-1938 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-trunk-seals\"\u003eMetro Trunk Seals\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1935, 1936, 1937, 1938 Packard Super Eight and 1935, 1936, 1937, 1938 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563923788059,"sku":"METRO-MP 843","price":166.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP843.jpg?v=1794207330"},{"product_id":"1932-1933-packard-custom-eight-1932-1933-packard-twelve-supersoft-tail-light-pads-metro-mp-845-d","title":"1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 845-D","description":"\u003ch1\u003e1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 845-D\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1932-1933 Packard Custom Eight and 1932-1933 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 845-D.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTail-light Pads.\u003c\/li\u003e\n\u003cli\u003e2-1\/4\" O.D.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 845-D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1932-1933 Packard Custom Eight\u003c\/li\u003e\n\u003cli\u003e1932-1933 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1932, 1933 Packard Custom Eight and 1932, 1933 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563925131547,"sku":"METRO-MP 845-D","price":99.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP845D.jpg?v=1794207368"},{"product_id":"1932-1933-packard-custom-eight-1932-1933-packard-twelve-supersoft-door-handle-pads-metro-mp-848","title":"1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft Door-Handle Pads - Metro MP 848","description":"\u003ch1\u003e1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft Door-Handle Pads - Metro MP 848\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1932-1933 Packard Custom Eight and 1932-1933 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 848.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDoor Handle Pads.\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" wide X 2-3\/8\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 848\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1932-1933 Packard Custom Eight\u003c\/li\u003e\n\u003cli\u003e1932-1933 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-body-and-trim-pads\"\u003eMetro Body \u0026amp; Trim Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1932, 1933 Packard Custom Eight and 1932, 1933 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563925852443,"sku":"METRO-MP 848","price":91.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP848.jpg?v=1794207386"},{"product_id":"1933-1934-packard-super-eight-1933-1934-packard-twelve-supersoft-bumper-bracket-pad-metro-mp-850","title":"1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Bumper-Bracket Pad - Metro MP 850","description":"\u003ch1\u003e1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Bumper-Bracket Pad - Metro MP 850\u003c\/h1\u003e\n\u003cp\u003eRubber bumpers and stops keep doors, hoods and trunks from rattling and protect painted edges from metal-on-metal contact. Metro makes this part for the 1933-1934 Packard Super Eight and 1933-1934 Packard Twelve. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 850.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBumper Bracket Pad.\u003c\/li\u003e\n\u003cli\u003e2-7\/8\" wide X 7-3\/8\" long.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 850\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003ePull or cut out the old bumper, clean the hole, and push the new one in place. A little soapy water or rubber lubricant makes installation easier.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-bumpers-and-stops\"\u003eMetro Bumpers \u0026amp; Stops\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Super Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563926212891,"sku":"METRO-MP 850","price":84.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP850.jpg?v=1794207396"},{"product_id":"1933-1934-packard-super-eight-1933-1934-packard-twelve-supersoft-tail-light-pads-metro-mp-852","title":"1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 852","description":"\u003ch1\u003e1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Tail-Light Pads - Metro MP 852\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1933-1934 Packard Super Eight and 1933-1934 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 852.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTail-light Pads.\u003c\/li\u003e\n\u003cli\u003e2-3\/4\" wide X 5-5\/8\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 852\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Super Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563926737179,"sku":"METRO-MP 852","price":129.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP852.jpg?v=1794207410"},{"product_id":"1935-packard-eight-1935-packard-super-eight-and-more-supersoft-bumper-arm-pad-metro-mp-855","title":"1935 Packard Eight, 1935 Packard Super Eight and more SUPERsoft Bumper Arm Pad - Metro MP 855","description":"\u003ch1\u003e1935 Packard Eight, 1935 Packard Super Eight and more SUPERsoft Bumper Arm Pad - Metro MP 855\u003c\/h1\u003e\n\u003cp\u003eRubber bumpers and stops keep doors, hoods and trunks from rattling and protect painted edges from metal-on-metal contact. Metro makes this part for the 1935 Packard Eight, 1935 Packard Super Eight, 1935 Packard Twelve and 1935 Packard Model 120-A. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 855.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBumper Arm pad.\u003c\/li\u003e\n\u003cli\u003e4-1\/4\" wide X 3-3\/4\" long.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 855\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003ePull or cut out the old bumper, clean the hole, and push the new one in place. A little soapy water or rubber lubricant makes installation easier.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1935 Packard Eight\u003c\/li\u003e\n\u003cli\u003e1935 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1935 Packard Twelve\u003c\/li\u003e\n\u003cli\u003e1935 Packard Model 120-A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-bumpers-and-stops\"\u003eMetro Bumpers \u0026amp; Stops\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1935 Packard Eight, 1935 Packard Super Eight, 1935 Packard Twelve and 1935 Packard Model 120-A\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563927982363,"sku":"METRO-MP 855","price":75.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP855.jpg?v=1794207424"},{"product_id":"1933-1934-packard-super-eight-1933-1934-packard-twelve-supersoft-park-light-pads-metro-mp-860","title":"1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Park-Light Pads - Metro MP 860","description":"\u003ch1\u003e1933-1934 Packard Super Eight, 1933-1934 Packard Twelve SUPERsoft Park-Light Pads - Metro MP 860\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1933-1934 Packard Super Eight and 1933-1934 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number MP 860.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePark Light Pads.\u003c\/li\u003e\n\u003cli\u003e1-3\/8\" wide X 4-1\/8\" long.\u003c\/li\u003e\n\u003cli\u003ePair\u003c\/li\u003e\n\u003cli\u003eMetro part number: MP 860\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1933-1934 Packard Super Eight\u003c\/li\u003e\n\u003cli\u003e1933-1934 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1933, 1934 Packard Super Eight and 1933, 1934 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563928637723,"sku":"METRO-MP 860","price":106.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/MP860.jpg?v=1794207434"},{"product_id":"1932-1933-packard-custom-eight-1932-1933-packard-twelve-supersoft-cowl-vent-seal-metro-rp-100-d","title":"1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft Cowl Vent Seal - Metro RP 100-D","description":"\u003ch1\u003e1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft Cowl Vent Seal - Metro RP 100-D\u003c\/h1\u003e\n\u003cp\u003eHood and cowl seals keep water, fumes and engine heat from finding their way toward the cabin. Metro builds this seal for the 1932-1933 Packard Custom Eight and 1932-1933 Packard Twelve. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number RP 100-D.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCowl Vent Seal.\u003c\/li\u003e\n\u003cli\u003e45\" long piece of black, skin-covered sponge.\u003c\/li\u003e\n\u003cli\u003eEnd is 3\/4\" wide X 3\/8\" high.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: RP 100-D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eClean the mounting surface and test fit before attaching. Check hood alignment after installing, since a new seal can change how the hood sits at first.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1932-1933 Packard Custom Eight\u003c\/li\u003e\n\u003cli\u003e1932-1933 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-hood-and-cowl-seals\"\u003eMetro Hood \u0026amp; Cowl Seals\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1932, 1933 Packard Custom Eight and 1932, 1933 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54563963863323,"sku":"METRO-RP 100-D","price":100.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/RP100D.jpg?v=1794208091"},{"product_id":"1932-1933-packard-custom-eight-1932-1933-packard-twelve-supersoft-mp-845-b-tail-light-pads-metro-cs","title":"1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft MP 845-B Tail-Light Pads - Metro CS 20-X","description":"\u003ch1\u003e1932-1933 Packard Custom Eight, 1932-1933 Packard Twelve SUPERsoft MP 845-B Tail-Light Pads - Metro CS 20-X\u003c\/h1\u003e\n\u003cp\u003eThis Metro part for the 1932-1933 Packard Custom Eight and 1932-1933 Packard Twelve replaces worn or missing original rubber with a fresh, correct-fitting piece. This is a Metro SUPERsoft part, made from soft, closed-cell sponge rubber that compresses easily for a tight seal. Metro part number CS 20-X.\u003c\/p\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHood to Cowl Seal, 35\" Long.\u003c\/li\u003e\n\u003cli\u003eEach\u003c\/li\u003e\n\u003cli\u003eMetro part number: CS 20-X\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstall Tips\u003c\/h2\u003e\n\u003cp\u003eRemove the old rubber and adhesive, clean the surface with a wax and grease remover, and test fit before gluing. Use a weatherstrip adhesive rated for automotive rubber.\u003c\/p\u003e\n\u003ch2\u003eWhy Metro\u003c\/h2\u003e\n\u003cp\u003eMetro Moulded Parts has specialized in rubber restoration parts for classic cars and trucks for decades, and restorers rely on its catalog for the seals, pads and bumpers other suppliers stopped making. Ships free from Radiant Speed Works.\u003c\/p\u003e\n\u003ch2\u003eVehicle Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1932-1933 Packard Custom Eight\u003c\/li\u003e\n\u003cli\u003e1932-1933 Packard Twelve\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKeep Shopping\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-packard-weatherstripping-rubber-parts\"\u003eMetro Packard Weatherstripping \u0026amp; Rubber Parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/metro-light-and-lamp-pads\"\u003eMetro Light \u0026amp; Lamp Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment: 1932, 1933 Packard Custom Eight and 1932, 1933 Packard Twelve\u003c\/h2\u003e","brand":"Metro Moulded Parts","offers":[{"title":"Default Title","offer_id":54564452958491,"sku":"METRO-CS 20-X","price":112.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/CS20X.jpg?v=1794211115"}],"url":"https:\/\/www.radiantspeedworks.com\/collections\/metro-packard-twelve-weatherstripping-rubber-parts.oembed","provider":"Radiant Speed Works","version":"1.0","type":"link"}