{"product_id":"60-degree-aluminum-bend-2-od-polished-vibrant-2814","title":"60 Degree Aluminum Bend, 2\" O.D. - Polished - Vibrant 2814","description":"\u003ch1\u003e60 Degree Aluminum Bend, 2\" O.D. - Polished\u003c\/h1\u003e\u003cp\u003eTight engine bays leave little room for a sweeping bend, and the short radius on Vibrant 2814 is built for exactly that situation. This 60 degree aluminum bend has a 2.00 in O.D. and a 2.50 in centerline radius, only 1.25 times the tube diameter, so the turn happens in a compact space while the mandrel-formed wall keeps the passage round. Small-bore tubing in this size shows up on compact turbo four-cylinder charge pipes, bypass valve recirculation lines, intake extensions and aluminum coolant reroutes.\u003c\/p\u003e\u003ch3\u003eSpecifications at a glance\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: 6061 aluminum, polished finish\u003c\/li\u003e\n\u003cli\u003eTube O.D.: 2.00 in\u003c\/li\u003e\n\u003cli\u003eWall: 0.070 in (1.8mm), per dealer spec sheets\u003c\/li\u003e\n\u003cli\u003eCenterline radius: 2.50 in\u003c\/li\u003e\n\u003cli\u003eLeg length: 6.00 in on each side\u003c\/li\u003e\n\u003cli\u003eBend angle: 60 degrees\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCutting and fitting tips\u003c\/h3\u003e\u003cp\u003eThe 6 in legs leave enough straight tube to trim, bead-roll and still fit a silicone coupler and clamp on each end. A 0.070 in wall gives a beginner a reasonable margin against burn-through when TIG welding at modest amperage, which makes this bend a friendly choice for a first intercooler pipe project. Cut with a fine-tooth blade or band saw, square the ends on a belt sander, and keep the polished surface taped while you work so clamps and vise jaws do not mark it.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eHow does this compare with the 2.75 in Vibrant 2818?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBoth are polished 6061 aluminum 60 degree bends, but 2818 has a 2.75 in O.D. and a much larger radius. Choose 2814 when the system runs 2 in tubing or the bend has to happen in a small space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat silicone fits over a 2 in tube?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny coupler or elbow with a 2.00 in I.D. slides over this bend, such as Vibrant's 2750 45 degree elbow. Pair each joint with a T-bolt clamp sized for 2 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it suitable for a boosted system?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVibrant describes its aluminum mandrel tubing as suited to pressurized and naturally aspirated applications. Bead-roll the ends that take silicone couplers so the hose cannot walk off under boost.\u003c\/p\u003e\u003ch2\u003eFitment: Universal. Confirm the sizes and thread types listed above against your application before ordering.\u003c\/h2\u003e","brand":"Vibrant Performance","offers":[{"title":"Default Title","offer_id":45243178352923,"sku":"2814","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0764\/5213\/5195\/files\/6ZnCly0E.jpg?v=1686274849","url":"https:\/\/www.radiantspeedworks.com\/products\/60-degree-aluminum-bend-2-od-polished-vibrant-2814","provider":"Radiant Speed Works","version":"1.0","type":"link"}