C8 Corvette Car Hauler Ramps, MaxRamps MRTX-6, 6-Inch Rise

The MRTX-6 is the compact middle option in the MaxRamps hauler lineup. It gives you a 6-inch rise at an 8.2 degree angle in a ramp that weighs about 6 pounds, which makes it the one to grab when storage space and quick setup matter more than the flattest possible approach.

It suits trailers and transporter decks where the step at the rear is moderate, and it works well as a garage tool too, for clearing a threshold or getting a little extra room under the nose for a creeper. Stock-height C8s with the front lift raised are a good match.

Construction is the same solid foam core and polyurea coating MaxRamps uses across the line, so it is light, quiet on the deck and easy to wipe clean after a wet track day.

Specifications

• MaxRamps part number: MRTX-6
• Rise: 6 inches
• Approach angle: 8.2 degrees
• Max tire width: 12 inches
• Weight: About 6 lb per ramp
• Load rating: 3,500 lb per pair, for vehicles up to 7,000 lb
• Construction: Solid core high density EPS foam with a polyurea skin
• Made in: USA
• Warranty: 12-month limited warranty from MaxRamps
• Quantity: Pair (2 ramps)

Common Questions

Is 8.2 degrees too steep for my car?
It depends on your front overhang and ride height. Use the measuring guide in the photos: tape out 36 inches from the front tire, measure up to the lowest point of the nose, and match that height to the minimum angle chart.

Can I store these in the car?
Yes. At roughly 6 pounds each they ride easily in the frunk or rear trunk.

Fitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1