MaxRamps
C8 Corvette Drive-Up Ramp Extenders, MaxRamps MR67-EXT, for 67-Inch Ramps, Pair
C8 Corvette Drive-Up Ramp Extenders, MaxRamps MR67-EXT, for 67-Inch Ramps, Pair
MXR-MR67-EXTCouldn't load pickup availability
RSW Rewards: Earn 2% back. Free to join! Earn 2 points per $1 spent; 100 points = $1 off a future order. Spend $100 and earn $2 toward your next purchase. Use the Rewards button to join or sign in. Rewards are discounts, not cash back. Join RSW Rewards / See how it works
C8 Corvette Drive-Up Ramp Extenders, MaxRamps MR67-EXT, for 67-Inch Ramps
The MR67-EXT extenders are the low-angle add-on for the 10-inch MaxRamps. They lay on top of the incline of the MR67-10 or MR67-10-SP and reduce the drive-up angle from 10.8 degrees to 6.6 degrees.
MaxRamps recommends extenders for cars with splitters or lowered suspension, and that describes a lot of C8s once the aero and coilovers go on. With the extenders in place you keep the full 10 inches of lift while giving the nose far more room on the way up.
They are 14 inches wide to match the 67-inch ramps, rated for tires up to 12 inches, and weigh about 4 pounds each.
Specifications
- MaxRamps part number: MR67-EXT
- Width: 14 inches
- Approach angle: 6.6 degrees when used with MR67-10 or MR67-10-SP
- Fits: MaxRamps MR67-10 and MR67-10-SP
- Max tire width: 12 inches
- Weight: About 4 lb each
- Construction: Solid core high density EPS foam with a polyurea skin
- Made in: USA
- Warranty: 12-month limited warranty from MaxRamps
- Quantity: Pair
Common Questions
Do I need these with a stock C8?
Many stock cars climb the 67-inch ramps fine with the front lift raised. Measure your nose height 36 inches ahead of the front tire and check it against the chart in the photos.
Will these fit the 56-inch ramps?
No. The 56-inch ramps use the MR56-EXT.
Fitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1
