• C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair
  • C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair
  • C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair
  • C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair
  • C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair
  • C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair
1 6

MaxRamps

C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair

C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece, 10-Inch Lift, Pair

MXR-MR67-10
$399.00
$399.00
Sale Sold out
Shipping calculated at checkout.

RSW Rewards: Earn 2% back. Free to join! Earn 2 points per $1 spent; 100 points = $1 off a future order. Spend $100 and earn $2 toward your next purchase. Use the Rewards button to join or sign in. Rewards are discounts, not cash back. Join RSW Rewards / See how it works

C8 Corvette Drive-Up Service Ramps, MaxRamps MR67-10, 67-Inch One-Piece

Ten inches of lift is where under-car work stops being a chore. The MR67-10 raises the front of a C8 high enough to work comfortably from a low creeper, and it does it with a 67-inch one-piece ramp that weighs about 16 pounds.

These are 14 inches wide and rated for tires up to 12 inches, so they take the wider 275 mm front tires on a Z06, E-Ray or ZR1 as well as Stingray fronts. The incline is 10.8 degrees, and if your car is lowered or wearing a deeper splitter, the MR67-EXT extenders bring that down to 6.6 degrees.

MaxRamps builds these from solid foam with a polyurea coating, so they will not crack in the cold, slide on epoxy floors or rust in a damp garage.

Specifications

  • MaxRamps part number: MR67-10
  • Length x width: 67 x 14 inches
  • Lift: 10 inches
  • Approach angle: 10.8 degrees (6.6 degrees with MR67-EXT)
  • Max tire width: 12 inches
  • Weight: About 16 lb per ramp
  • Load rating: 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)
  • Design: One-piece
  • Construction: Solid core high density EPS foam with a polyurea skin
  • Made in: USA
  • Warranty: 12-month limited warranty from MaxRamps
  • Quantity: Pair (2 ramps)

Common Questions

Will my splitter clear?
Most stock C8s clear with the front lift raised. If you run a lower setup, measure 36 inches out from the front tire and compare your height to the chart in the photos, or add the MR67-EXT extenders.

Should I get the split version?
Get the MR67-10-SP if you want to remove the incline for side access to the wheels and brakes. The one-piece is lighter and simpler.

Fitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1

View full details