C8 Corvette Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch

The MR56-8-SP gives you the same 8-inch lift and 56-inch footprint as the one-piece MR56-8, but the incline separates from the platform. Drive up, set the brake, chock the rear wheels, then pull the incline sections away so you can roll a creeper in from the side.

That side access is the reason to spend a little more on the split design. On a C8 it makes front brake work, wheel well inspections and underbody panel removal much easier, because you are not reaching over the ramp to get to anything.

Each assembled ramp is 12 inches wide with a 10.8 degree climb. The MR56-EXT extenders lay on top of the incline when you need a gentler 6.6 degree approach.

Specifications

• MaxRamps part number: MR56-8-SP
• Length x width: 56 x 12 inches
• Lift: 8 inches
• Approach angle: 10.8 degrees (6.6 degrees with MR56-EXT)
• Max tire width: 10 inches
• Weight: About 12 lb per ramp, assembled
• Load rating: 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)
• Design: Two-piece split, removable incline
• Construction: Solid core high density EPS foam with a polyurea skin
• Made in: USA
• Warranty: 12-month limited warranty from MaxRamps
• Quantity: Pair (4 pieces total)

Common Questions

Is it safe to remove the incline with the car on it?
Yes, that is what it is designed for. Always set the parking brake and chock the wheels still on the ground before you get under the car.

Do these fit Z06 front tires?
The tire limit is 10 inches. Z06, E-Ray and ZR1 front tires are about 10.8 inches wide, so the 14-inch-wide MR67-10-SP is the better fit for those cars.

Fitment: 2020, 2021, 2022, 2023, 2024, 2025, 2026 C8 Corvette Stingray, Z06, E-Ray and ZR1