Chevrolet Camaro Car Hauler Ramps, MaxRamps MRTX-6, 6-Inch Rise

The MRTX-6 gives a Camaro 6 inches of rise in a 45-inch ramp. It's for lower trailer decks, or for adding just enough height at the base of your trailer's own ramps to clear the front lip.

The approach angle is 8.2 degrees, which suits stock-height LT, SS and V6 Camaros from both generations.

At about 6 pounds each, these are some of the easiest ramps to carry around. Made in the USA from foam with a grippy polyurea coating.

Specifications

• MaxRamps part number: MRTX-6
• Size per ramp: 45 x 14 x 6 inches
• Rise: 6 inches
• Approach angle: 8.2 degrees
• Max tire width: 12 inches
• Weight: About 6 lb per ramp
• Load rating: 3,500 lb per pair, for vehicles up to 7,000 lb
• Construction: Solid-core high-density EPS foam with a polyurea coating
• Made in: USA
• Quantity: Pair

Common Questions

Is 6 inches enough?
It depends on your trailer. Measure from the ground to the top of the trailer's ramp or deck edge. If it's taller than 6 inches, step up to a 7- or 8-inch ramp.

Will my lowered Camaro clear it?
On a lowered car, look at the MRTX-5 or MRTX-7. Both have lower approach angles.

Is this a good alternative to Race Ramps?

Race Ramps sells trailer ramps as well. The MaxRamps MRTX line covers rises from 4 to 8 inches, includes flap and tilt-deck versions, and is rated at 3,500 pounds per pair. Race Ramps is a trademark of its owner and is not affiliated with Radiant Speed Works or MaxRamps.

Keep Shopping

• Chevrolet Camaro Car Ramps
• MaxRamps Car Hauler & Trailer Ramps

Fitment: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Chevrolet Camaro