Dodge Challenger Wheel Cradles, MaxRamps MRCR-10, 10-Inch One-Piece

Wheel cradles are the clean way to put a Challenger in the air and leave it there. Jack the car, set the tire into the MRCR-10 cradle, lower the jack, and the car rests on the tire at 10 inches high instead of on stands at the pinch welds.

The cradles are 15 inches long and 12 inches wide, rated for tires up to 12 inches wide and 24 to 30 inches tall. That covers stock Challenger tires from the 245s on base cars to the 305s on the Scat Pack and Hellcat widebody cars. Use two sets and all four tires sit at the same height, which is the setup to have for long-term storage or for working on exhaust and suspension.

Each cradle weighs about 4 pounds and has a carrying strap. MaxRamps rates them at 1,750 pounds per cradle. You will need a hydraulic jack to lift the car onto them.

Specifications

• MaxRamps part number: MRCR-10
• Size: 15 x 12 inches
• Lift: 10 inches
• Max tire width: 12 inches
• Tire diameter: 24 to 30 inches
• Weight: About 4 lb per cradle
• Load rating: 1,750 lb per cradle, 3,500 lb per pair
• Extras: Carrying strap
• Construction: Solid core high density EPS foam with a polyurea skin
• Made in: USA
• Warranty: 12-month limited warranty from MaxRamps
• Quantity: Pair

Common Questions

Do I need a jack?
Yes. Lift the car with a hydraulic jack, set the cradle under the tire, then lower the car onto it.

Can I use these for winter storage?
Yes. Two sets keep the car level on its tires and take the load off the suspension pick-up points.

Fitment: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Dodge Challenger