Ford Bronco Low Angle Split Drive-Up Ramps, MaxRamps MR72-8-SP, 72-Inch

The MR72-8-SP spreads an 8-inch lift over 72 inches, for a 6.8 degree incline. On a Bronco that gentle climb means less wheel spin on a slick garage floor and a smoother roll up, which is handy for trucks on aggressive mud-terrain tread.

It is a split design, so the incline comes off once the truck is up and the ramp shrinks to just the platform under the tire. Each assembled ramp weighs about 12 pounds.

These ramps are 12 inches wide with a 10-inch tire limit, so they fit narrower factory Bronco tires. If you run 315s or bigger, go with the 14-inch-wide MR80-10-SP.

Specifications

• MaxRamps part number: MR72-8-SP
• Length: 72 inches
• Width: 12 inches
• Lift: 8 inches
• Approach angle: 6.8 degrees
• Max tire width: 10 inches
• Weight: About 12 lb per ramp, assembled
• Load rating: 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)
• Design: Two-piece split, removable incline
• Construction: Solid core high density EPS foam with a polyurea skin
• Made in: USA
• Warranty: 12-month limited warranty from MaxRamps
• Quantity: Pair (4 pieces total)

Common Questions

Why a low angle ramp on a truck?
A shallow climb takes less throttle, which makes it easier to stop exactly on the platform and keeps the ramp from being pushed across the floor.

Does the Bronco front bumper clear?
With 8 inches of lift and a 6.8 degree climb, factory and most aftermarket Bronco bumpers clear easily.

Fitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door