Ford Bronco Low Angle Split Drive-Up Ramps, MaxRamps MR80-10-SP, 80-Inch

The MR80-10-SP is the biggest drive-up ramp MaxRamps makes, and it is the best fit for Broncos on bigger tires. It is 14 inches wide with a 12-inch tire rating, gives you a full 10 inches of lift, and keeps the incline to 8 degrees by stretching it over 80 inches.

That combination lets a Bronco roll up smoothly instead of lurching onto a short, steep ramp, and once the truck is parked the incline comes off for side access to the wheels and brakes.

Each assembled ramp weighs about 18 pounds. Like every MaxRamps product it is solid foam with a polyurea coating and is made in the USA.

Specifications

• MaxRamps part number: MR80-10-SP
• Length x width: 80 x 14 inches
• Lift: 10 inches
• Approach angle: 8 degrees
• Max tire width: 12 inches
• Weight: About 18 lb per ramp, assembled
• Load rating: 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)
• Design: Two-piece split, removable incline
• Construction: Solid core high density EPS foam with a polyurea skin
• Made in: USA
• Warranty: 12-month limited warranty from MaxRamps
• Quantity: Pair (4 pieces total)

Common Questions

Will 35-inch tires fit?
Diameter is not a problem on a drive-up ramp. Width is what matters. MaxRamps recommends tires up to 12 inches wide, and 315s are about 12.4 inches, so measure your actual tread width.

How much room do I need?
Plan on roughly 80 inches in front of each tire for the drive-up.

Fitment: 2021, 2022, 2023, 2024, 2025, 2026 Ford Bronco 2-Door and 4-Door