Ford Mustang Split Drive-Up Service Ramps, MaxRamps MR56-8-SP, 56-Inch, 8-Inch Lift

The MR56-8-SP gives your Mustang the same 8-inch lift as the MR56-8, with one big difference: once the car is up and secured as the MaxRamps manual describes, the incline section comes out. That clears the floor in front of and beside the wheel for brake work, a drain pan, a creeper or a jack.

The approach is 10.8 degrees. For lowered Mustangs or cars with a front splitter, the MR56-EXT extenders bring the combined angle to 6.6 degrees.

Each assembled ramp is 56 inches long, 12 inches wide and weighs about 12 pounds, rated for tires up to 10 inches wide. The pair comes as four pieces, which also makes them easier to store and to throw in the trunk.

Specifications

• MaxRamps part number: MR56-8-SP
• Size per ramp: 56 x 12 x 8 inches assembled
• Lift: 8 inches
• Approach angle: 10.8 degrees (6.6 degrees with MR56-EXT)
• Max tire width: 10 inches
• Weight: About 12 lb per ramp, assembled
• Load rating: 1,750 lb per ramp, 3,500 lb per pair (vehicles up to 7,000 lb)
• Design: Two-piece split, removable incline
• Construction: Solid-core high-density EPS foam with a polyurea coating
• Made in: USA
• Quantity: Pair

Common Questions

Will these fit my Mustang's tires?
Check your front tire width against the max tire width listed above. Tire sizes vary a lot across Mustang trims and model years, so look at the size on the sidewall before you order.

When can I take the incline out?
Only after the car is on the platforms and secured as the MaxRamps manual directs. Chock the rear wheels before working under the car.

Keep Shopping

• Ford Mustang Car Ramps
• MaxRamps Drive-Up Service Ramps

Fitment: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026 Ford Mustang