Stainless Steel Quick Release V-Band Clamp 5.75" O.D.

V-band joints are the standard for turbo outlets, downpipes and large-diameter exhaust because a single clamp pulls two tapered flanges together into a tight, gasket-free seal. The catch on many clamps is the long T-bolt you have to spin off every time the joint comes apart. Vibrant's 1494C adds a quick-release mechanism, so a 5-inch diesel or big-turbo exhaust can be opened up in seconds when you need to pull a turbo, swap a test pipe or check a wheel.

Sizing

V-band clamps are sized by the outside diameter of the flange, not the pipe. This clamp fits V-band flanges with a 5.75-inch OD, which is the flange size usually welded to 5-inch tubing. Measure across the outside of your flange lip before ordering.

Specifications

• Part number: Vibrant 1494C
• Fits: V-band flanges, 5.75 in. OD
• Material: 304 stainless steel
• Style: quick release
• Warranty: 1-year limited

Installation Tips

Weld the two flanges square to the pipe and align them carefully, since a V-band will not pull a crooked joint straight. Seat the clamp over both flanges, tighten it evenly while tapping around the band with a soft mallet to help it settle, then retighten after the first heat cycle. Anti-seize on the threads keeps it serviceable in high heat.

Frequently Asked Questions

Will this fit a 5.75 inch pipe?

No. The 5.75-inch dimension is the flange OD. The clamp fits flanges made for 5-inch tubing.

Do I need a gasket?

Most V-band flange pairs seal metal to metal. Some designs use an O-ring or gasket, so follow the flange maker's instructions.

How long does the clamp last?

It is reusable. Check the band for cracks and the threads for galling each time it comes off, and replace it if either shows up.

Fitment: Universal. Confirm the sizes and thread types listed above against your application before ordering.